Great Lakes 4x4. The largest offroad forum in the Midwest banner

XJ will not start, Help

1403 Views 21 Replies 10 Participants Last post by  jeep1993
93 XJ, I recently purchased this. The previous owner had pulled the motor out and thought the bearing in the lower end was bad. It was only the flywheel. They reinstalled it. It will not fire. Does have fuel. Changed the crank senor (under the rotor in the distrib), crank position senor on the trans housing. Cranks over fine but does not fire. Owner said dist. was not pulled when motor removed. Help!!
1 - 1 of 22 Posts
If the PCM isn't grounded then you'll hear a really fast clicking from the ASD relay. You'll get fuel pressure @ the rail but a pulse signals won't be sent to the injectors, that's why I asked if the plugs were wet with fuel.
The plugs are wet. The ADS relay clicks fast, when key is on before you start it.
looks like someone has some checking to do. Hopefully that's all it needs.:naughty:
1 - 1 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.