Great Lakes 4x4. The largest offroad forum in the Midwest banner
1 - 7 of 7 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter · #1 · (Edited)
LISTING THIS FOR A FRIEND IN KALAMAZOO,
SO CONTACT HIM AT
[email protected] or 269-208-2449 ask for Kyle

heres the lowdown he built the motor and now needs to sell it, great deal for someone on here;

383 Stroker motor all brand new except for the rebuilt Edelbrock 4 BBL 650 carb and rebuilt 2.02/1.60 heads
He built it for low to mid range power great for street or 4 WDs
list of goodies
GML05 block bored .30 over
Scat Stroker kit including
cast 3.75 " crank, Scat I Beam Rods
Keith Black Hyperutectic pistons
9.5:1 compression
Comp Cams Xtreme Energy 218 duration/483 lift (@.050)
Comp Cams hydraulic lifters
Crane Cams Valve springs, retainers, keepers
Heads are 2.02/1.60s just rebuilt
Edelbrock RPM dual plane manifold
All FelPro gaskets and seals
flywheel
ARP Rod Bolts
All Clevite 77 Bearings
Jegs high performance oil pump
even has an air cleaner on it
He is trying to get it dynoed now

any other info please contact him at the above email/phone number
ready to bolt into your project and tear up the trails/mud/ black top:woot:
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top