[howell_jeep]

1. I need help hooking up lokar cable to Edelbrock carb on amc360.
Here is a pic of the carb. I'm not sure where it needs to go.

2. In the other pic there are vacuum lines from carb and booster, which one goes where?

3. Heater hoses: which hose goes where? One that connects to water pump goes on the upper or lower connection?

thanks

 

[howell_jeep]

 

[Pokerob]

i put mine on a 258 with a 2100 carb. that was fun. everything was "custom" ninja

 

[howell_jeep]

i put mine on a 258 with a 2100 carb. that was fun. everything was "custom" ninja

That's not much help

 

[addicted]

1. I need help hooking up lokar cable to Edelbrock carb on amc360.
Here is a pic of the carb. I'm not sure where it needs to go.

2. In the other pic there are vacuum lines from carb and booster, which one goes where?

3. Heater hoses: which hose goes where? One that connects to water pump goes on the upper or lower connection?

thanks

The throttle valve cable will go on the bottom of the throttle linkage behind the hose that is in the pic so that it gets pulled when the throttle cable pulls the throttle open.

The booster hose usually goes to a port on the intake manifold not the carb. It goes there so it always has vacuum when the engine is running.

The heater core will have two different sizes for the hoses and the engine will have a port on it that is a matching size so the hoses will only hook up in the appropriate places, i.e; engine output to heater core input and vice-a-versa.