Great Lakes 4x4. The largest offroad forum in the Midwest banner

1 - 9 of 9 Posts

·
Registered
Joined
·
3,931 Posts
Discussion Starter #1
where does the breather hose for the D30 run. the clip must have broke and i dont know where it was before.
 

·
Registered
Joined
·
3,931 Posts
Discussion Starter #3
thank you, will fix that when i get home :thumb:
 

·
.
Joined
·
8,046 Posts
It goes up. Nothing else really matters.

Just keep it kink free and as high as possible.
 

·
Registered
Joined
·
1,789 Posts
i guess it depends what vehicle and what year you're working on. every TJ and XJ that i've worked on usually had them going to the top driver side of the radiator.

but it really doesn't matter, as long as it goes up, doesn't melt on anything, and has enough slack to allow the axle to flex and droop FULLY.
 

·
.
Joined
·
8,046 Posts
i guess it depends what vehicle and what year you're working on. every TJ and XJ that i've worked on usually had them going to the top driver side of the radiator.

but it really doesn't matter, as long as it goes up, doesn't melt on anything, and has enough slack to allow the axle to flex and droop FULLY.
A good point that I didn't mention.
 
1 - 9 of 9 Posts
Top