Great Lakes 4x4. The largest offroad forum in the Midwest banner

1 - 1 of 1 Posts

·
Registered
Joined
·
475 Posts
Discussion Starter #1
ok here w go. i have a 88.5 tintop. i have installed a tracker 1.6 with efi. wiring is 98% done. has a spoa with driveshaft spacers. needs a rear breakline and front ones installed. also needs shocks. body modding has begun. drivers rocker was cut out and has a angle tacked in place. have another piece to do pass side. rear fenderwell was removed on drivers side but have it. virtual lift (fender trimming) has been started. i know it seems like alot but most of this stuff is nearing completion. axles r stock currently. i have a tracker rear axle and front diff for this that is 4.52 insted of the stock 3.73. i also have a set of toyota axles that may be purchased with this or in the trade. but i will not sell them seperate. i also could incluse some 31 tsls on waggon wheels for extra or depending on trade. this truck has alot of potential but i have been spending my time on my 4 runner. so i am asking 1400 or trade without axles. here r a few pics.



and more detailed pics can be seen here
http://s7.photobucket.com/albums/y278/hman1991/other/
 
1 - 1 of 1 Posts
Top