Johnny's GoatBuilt JHF buggy build - Page 25 - Great Lakes 4x4. The largest offroad forum in the Midwest

JohnnyJ · March 6th, 2019, 09:58 AM

Quote:

Originally Posted by TJontherox

Looking good! I am in love with those wheels, but not the price. Definitely not in the budget for my rebuild

I like them a lot. Quality seems better than other wheels I've messed with. We will see how they hold up.

Quote:

Originally Posted by whiterhino

VERY nice!

Thanks!

Quote:

Originally Posted by halfgassed

Bad ass! Looks like it may get a little cold for another UP snow run🤔
I swear I won’t have a 10bolt next time😆

I still have my old mojave heater sitting on the shelf. I need to figure out where to fit it in for some cold weather wheeling.

I felt bad for you D44/10-bolt guys for having to replace shafts so often that trip. It was cold to lay on the ground. I wasn't happy having to take apart my frozen hub 5' off the road.

JohnnyJ · March 8th, 2019, 10:40 AM

When people ask how it's going...

xj4life · March 8th, 2019, 10:54 AM

Lousypirate · March 8th, 2019, 02:57 PM

Quote:

Originally Posted by JohnnyJ

When people ask how it's going...

#metoo

Sent from my iPhone using Tapatalk

xj4life · March 8th, 2019, 03:16 PM

If it makes you feel any better I'm three years in to a buggy build of my own and you're way ahead of me

halfgassed · March 18th, 2019, 03:46 PM

Quote:

Originally Posted by JohnnyJ

When people ask how it's going...

Now entering.....project car hell😕? Got a few myself, When ya get that Mohave heater hooked up look me up, we’ll do some snow wheeling, we have a sort of done 1ton k5 blazer on 40s, and starting next winter a linked 1ton early bronco on 42s,

whiterhino · June 3rd, 2019, 07:45 AM

Updates?

Jrgunn5150 · July 9th, 2019, 10:05 AM

I've been looking hard at these Goatbuilt kits. IDK which one is right for me though.

I'm 6'5 and don't plan to compete in anything lol. I just can easily make the case it makes more sense to start there than with a rusty Jeep frame.

I enjoyed reading the whole build thread, I hope you're still working on it.

whiterhino · July 9th, 2019, 12:09 PM

@JohnnyJ has been preoccupied with some family traveling sports. He is (I'm guessing) 6'2"-6'3".
@Ironman Offroad just ordered a Goatbuilt LJ kit. I don't know if he has started on it yet or not.

Ironman Offroad · July 9th, 2019, 12:13 PM

Still waiting for ours.........

Jrgunn5150 · July 9th, 2019, 12:20 PM

Quote:

Originally Posted by whiterhino

@JohnnyJ has been preoccupied with some family traveling sports. He is (I'm guessing) 6'2"-6'3".
@Ironman Offroad just ordered a Goatbuilt LJ kit. I don't know if he has started on it yet or not.

What's the real difference between this and the LJ? The ability to run the body and be legal? Then the Ibex is supposed to be all super competitive?

JohnnyJ · July 10th, 2019, 11:14 AM

I'm 6'1" and fit OK. If I were to do another, I would do pass drop transfer case and drop the driver's seat lower to get more head room. I can't get my seat lower without sitting on the t-case.

I would expect the LJ kit to be larger than the JHF kit since it's based on TJ/LJ dimensions.

I haven't spent much time in the shop in the past few months. Maybe 2 days poking at stuff. Busy with family at the moment. Had a few hours last week but it 90+ degrees and frankly I didn't care to go sweat it out.

greygoose · July 10th, 2019, 11:38 AM

Quote:

Originally Posted by JohnnyJ

I'm 6'1" and fit OK. If I were to do another, I would do pass drop transfer case and drop the driver's seat lower to get more head room. I can't get my seat lower without sitting on the t-case.

I would expect the LJ kit to be larger than the JHF kit since it's based on TJ/LJ dimensions.

I haven't spent much time in the shop in the past few months. Maybe 2 days poking at stuff. Busy with family at the moment. Had a few hours last week but it 90+ degrees and frankly I didn't care to go sweat it out.

And no one can blame you for that.

ROXROES · July 12th, 2019, 01:38 PM

Quote:

Originally Posted by JohnnyJ

I'm 6'1" and fit OK. If I were to do another, I would do pass drop transfer case and drop the driver's seat lower to get more head room. I can't get my seat lower without sitting on the t-case.

I would expect the LJ kit to be larger than the JHF kit since it's based on TJ/LJ dimensions.

I haven't spent much time in the shop in the past few months. Maybe 2 days poking at stuff. Busy with family at the moment. Had a few hours last week but it 90+ degrees and frankly I didn't care to go sweat it out.

I'm 6'2" and fit in AJ's JHF great (he's same height), lots of extra headroom.

I just started another JHF, hope to have it done by New Years. Ditching all the front tubing, and adding doors among a bunch of other things. I feel your pain on the heat, I installed AC in the shop a month ago and its incredible. Didn't want to repeat last Summer.

JohnnyJ · August 7th, 2019, 11:05 AM

I was in the barn last night... for maybe 15 minutes.

I did receive the narrowed long side 1550 axle shaft and drive slugs from Branik. Hoping to get back out there this month.

RDK_YJ88 · August 7th, 2019, 03:15 PM

xj4life · August 7th, 2019, 03:32 PM

Quote:

Originally Posted by JohnnyJ

I was in the barn last night... for maybe 15 minutes.

That's about how my build is going this summer to

Kids, family trips, summer heat/humidity, spending money on other things quicker than I can make it....build gets put on hold for a bit.

JohnnyJ · August 8th, 2019, 02:23 PM

Quote:

Originally Posted by RDK_YJ88

I won't ask about the 4600 build...

roll-bar Bob · August 8th, 2019, 03:03 PM

Should be done it Two Weeks

RBB

RDK_YJ88 · August 8th, 2019, 05:56 PM

Quote:

Originally Posted by JohnnyJ

I won't ask about the 4600 build...

I've made a little progress! But mostly working on other stuff for an event in October.

March 8th, 2019, 10:40 AM	#482
JohnnyJ Low Range Drifter Join Date: 11-09-05 Location: Hartland, MI Posts: 7,909 iTrader: (38) Mentioned: 85 Post(s)	When people ask how it's going... Attached Thumbnails __________________ Surviving Project Car Hell Buggy build

March 8th, 2019, 10:54 AM	#483
xj4life Senior Member Join Date: 11-09-05 Location: LaPorte, IN Posts: 9,516 iTrader: (18) Mentioned: 22 Post(s)	__________________ I wanna go fast! - Ricky Bobby

March 8th, 2019, 03:16 PM	#485
xj4life Senior Member Join Date: 11-09-05 Location: LaPorte, IN Posts: 9,516 iTrader: (18) Mentioned: 22 Post(s)	If it makes you feel any better I'm three years in to a buggy build of my own and you're way ahead of me __________________ I wanna go fast! - Ricky Bobby

July 10th, 2019, 11:14 AM	#492
JohnnyJ Low Range Drifter Join Date: 11-09-05 Location: Hartland, MI Posts: 7,909 iTrader: (38) Mentioned: 85 Post(s)	I'm 6'1" and fit OK. If I were to do another, I would do pass drop transfer case and drop the driver's seat lower to get more head room. I can't get my seat lower without sitting on the t-case. I would expect the LJ kit to be larger than the JHF kit since it's based on TJ/LJ dimensions. I haven't spent much time in the shop in the past few months. Maybe 2 days poking at stuff. Busy with family at the moment. Had a few hours last week but it 90+ degrees and frankly I didn't care to go sweat it out. __________________ Surviving Project Car Hell Buggy build

August 7th, 2019, 11:05 AM	#495
JohnnyJ Low Range Drifter Join Date: 11-09-05 Location: Hartland, MI Posts: 7,909 iTrader: (38) Mentioned: 85 Post(s)	I was in the barn last night... for maybe 15 minutes. I did receive the narrowed long side 1550 axle shaft and drive slugs from Branik. Hoping to get back out there this month. __________________ Surviving Project Car Hell Buggy build

June 3rd, 2019, 07:45 AM	#487
whiterhino I'm not old, honest... Join Date: 03-07-06 Location: Davisburg MI Posts: 29,438 iTrader: (25) Mentioned: 172 Post(s)	Updates?

July 9th, 2019, 10:05 AM	#488
Jrgunn5150 Senior Member Join Date: 01-13-10 Location: Ionia Michigan Posts: 2,100 iTrader: (2) Mentioned: 5 Post(s)	I've been looking hard at these Goatbuilt kits. IDK which one is right for me though. I'm 6'5 and don't plan to compete in anything lol. I just can easily make the case it makes more sense to start there than with a rusty Jeep frame. I enjoyed reading the whole build thread, I hope you're still working on it.

July 9th, 2019, 12:09 PM	#489
whiterhino I'm not old, honest... Join Date: 03-07-06 Location: Davisburg MI Posts: 29,438 iTrader: (25) Mentioned: 172 Post(s)	@JohnnyJ has been preoccupied with some family traveling sports. He is (I'm guessing) 6'2"-6'3". @Ironman Offroad just ordered a Goatbuilt LJ kit. I don't know if he has started on it yet or not.

July 9th, 2019, 12:13 PM	#490
Ironman Offroad Cool parts peddler Join Date: 07-29-10 Location: Saginaw, Michigan Posts: 1,831 iTrader: (12) Mentioned: 59 Post(s)	Still waiting for ours.........

August 7th, 2019, 03:15 PM	#496
RDK_YJ88 589 Fabrication Join Date: 06-16-06 Location: Fenton, MI Posts: 3,506 iTrader: (43) Mentioned: 39 Post(s)

August 8th, 2019, 03:03 PM	#499
roll-bar Bob Senior Member Join Date: 01-20-06 Location: M CITY Posts: 3,441 iTrader: (3) Mentioned: 6 Post(s)	Should be done it Two Weeks RBB

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1985 Grand Wagoneer $7,500	HenryJonesJr	Vehicles for sale	1	August 26th, 2016 09:27 AM
1977 Wagoneer street/strip project $3000 Grand Rapids MI	ghinmi	Vehicles for sale	0	August 7th, 2016 08:47 PM
1985 Grand Wagoneer $8,500 Or Best Offer	HenryJonesJr	Vehicles for sale	0	June 9th, 2016 09:18 PM
1977 Wagoneer project $4000 Grand Rapids MI	ghinmi	Vehicles for sale	1	April 16th, 2016 02:08 PM
1985 Grand Wagoneer Project - Almost Done	HenryJonesJr	Vehicles for sale	0	April 10th, 2016 07:43 PM