|July 20th, 2008, 09:58 PM||#1|
Built 93 Sahara READY 4 THE ROCKS **SOLD**
93 Jeep Yj sahara
Custom made front tube fenders
Wheelbase has been extended to 104"
Full roll cage extended from the factory one.
New frame, plated from head to toe since i got carried away
1" daystar body lift (replaced the whole mount)
Custom rear bumper with 8000 LBS winch
Front suspension is a custom 3-link with panhard bar.
Lower links are made from 2 1/4" 3/8 wall dom tubing 1 1/4 heims with bushings at the axle end.
upper links are made from 2" 1/4 wall dom tubing with 7/8 heims
Front and rear are on coil springs.
Rear suspension is a triangulated 4-link
Upper and lower links are made from 2" 1/4 dom tubing with 7/8 heim joints
All heims are Qa1 chrome moly units.
Dodge Dana 44 front with 4.10 gears welded, with custom high steer arms and hydro assist.
Dodge Dana 60 FF rear with 4.10's and sure grip, disc brake conversion I also have an extra welded carrier to go with it.
It's sitting on 37 x 13 x 16.5 Boggers fronts are 40 percent in the middle and 85 on the outside lugs rear are about 75 percent in the middle and 95 on the outside.
The engine is a very health dodge 5.9 magnum with fuel injection in tact.
NV3550 with dana 300 t-case passed emmisions last year.
Custom aluminum fuel cell tucked up between the frame rails.
It is now complete outside of the being painted.
7500.00 firm serious inquires only will send pics to those interested
I also have 1 brand new bogger 37 13 16.5 bogger that i may let go with the jeep
NO TRADES PLEASE .
call 519 999 3668 or email firstname.lastname@example.org
Located just 15 minutes from the detroit windsor tunnel
this is an older pic before the tank and bumpers were done
Last edited by littlejeepr; July 21st, 2009 at 10:13 PM.
|July 5th, 2009, 10:57 AM||#19|
Still for sale $4000 US with the 37 x 13x 16.5
Haven't had the patients to touch it lately to get it ready for paint or anything else I want to do so it's for sale
Last edited by littlejeepr; July 13th, 2009 at 11:09 AM.
|Thread Tools||Search this Thread|