I have a very nice, little rust, 73 chevy front dana 44. This is a 1/2 ton 6-lug low pinion axle housing. It has the multiple support ribs on the center section also. It comes with the inner and outer shafts w/ joints, diff cover, yolk, 3.07 gears/ open carrier installed (good bearings and seals). Also comes with the 6 bolt hubs and rotors. The rotors are in ok shape and I assume can be turned. The hubs are good also. This axle had previously been cleaned and painted in some kind of industrial paint... so It's got little rust and is very clean. I measured this and it's 67.75" - 68" wms to wms to be approximate. It's also a leaf sprung and passenger side drop. I can get you the leaf perch measurements if needed. The hubs are 6 on 5.5 bolt pattern.
It will be missing the outer knuckles, caliper brackets, calipers, spindles, tie rod and lockouts.
Everything else is there.
Located in Troy, MI 48083