|May 14th, 2012, 02:20 PM||#1|
dana 60s and parts
thinking about selling off some of my parts that it dont look like ill be using unfortunately. i have collected these parts of the past few months and i wish i could still use them.
for the front i have bought a 88 ford hp 60. the axles were taken apart cleaned and inspected for damage.i removed all factory brackets and cleaned up the tubing. i cut off part of the short side diff to make room for link brackets. as of right now the housing is bare with no brackets currently on it.
i have all the needed brackets to 3 link the front suspension for axle side including shock hoops and coil over tabs.
the front axle parts include
the rear dana 60 includes
all these parts are new and unused.
i would like to see
i have alot into these axles. id like to see a 4300 for the axles with all parts built and ready to go.
WILL NOT PART OUT. ALL OR NONE.
Last edited by boggin-machine; May 16th, 2012 at 02:44 PM.
|May 15th, 2012, 09:51 PM||#3|
Join Date: 09-15-07
Location: fenton /hartland mi
Mentioned: 148 Post(s)
(mr.green)So you are calling CC a liar?? Not a nice way to treat your bitch.
tube bending and gear installs pm me for info! gears installed for $150 and up per axle.
|Thread Tools||Search this Thread|