|4x4 Vendor Area Companies That Deliver Great Products Or Services and a list of companies offering GL4x4 Discounts|
|January 17th, 2013, 04:25 PM||#1|
Daves Offroad Supply - Info/Specials/Quotes
Introducing Daves Offroad Supply
This is a general thread for info about us and contact information. You are welcome to post any questions or comments you may have for me in here too.
5955 Sullivan Trail
Nazareth, PA 18064
Website: Welcome to Daves Offroad Supply
Here is a list of companies we are vendors for.
All Pro Offroad
Iron Rock Offroad
Yukon Gear & Axle
Blue Torch Fab
G2 Axle & Gear
Griffen Thermal Products
Rock Hard 4x4
Super Swamper Tires
Superior Axle & Gear
We can get many more too! If its not on the list and something you are interested in post up and I will let you know if we are able to help.
Last edited by Daves Offroad; June 13th, 2014 at 01:05 PM.
|February 21st, 2013, 12:04 PM||#2|
Thank you for the orders! The Great Lakes crew has been a great bunch to do business with!
|March 5th, 2014, 09:45 AM||#11|
|March 5th, 2014, 09:46 AM||#12|
|April 3rd, 2014, 09:06 AM||#14|
After years of development and testing, these knuckles and steering arms have set a new standard in Toyota knuckle strength and reliability. The Fully Loaded Six Shooter Kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker than stock material and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver.
Included in The Fully Loaded Six Shooter Kit is a special 6 hole shim pack for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs are needed for installation. We think the Fully Loaded Six Shooter Kit is so bullet proof that we have given it our world famous no questions asked lifetime warranty.
Steering Arms (2)
Fully Loaded Six Shooter Knuckle Kit, 130052-1-KIT
$262 Plus Free Shipping to the Lower 48
|July 3rd, 2014, 11:43 AM||#20|
140250-1-KIT: Trail Gear Rear Disc Brake Kit - Fits '79-'95 = $299.00
PLUS FREE DOMESTIC GROUND SHIPPING!