|September 24th, 2014, 03:08 PM||#1|
Mud Slut-Hit Every Hole!!
Join Date: 01-25-06
Location: Traverse City
Mentioned: 5 Post(s)
Jeep TJ Body mount bolt repair...
So after looking around the interweb for what others did with broken or stripped out body mount bolts(not really finding any good TJ right ups or pics) and my jeep being down 4, I thought I would post a few of what I did.
I read of lots of 4 inch holes and slicing up the floor and .... so anyway.
1 inch hole saw and a drill bit to clean out the holes. Some grade 8 bolts washers and lock washers. What i thought was going to take all day, took about 2 hours.
Drill hole saw over bolt.
Drill out hole.
New 1/2 inch bolt with washers and lock washer.
place 1 inch rubber grommet in hole.
|Thread Tools||Search this Thread|