|October 1st, 2011, 12:37 PM||#1|
Join Date: 10-16-07
Location: grand rapids, Michigan
Mentioned: 0 Post(s)
TW cv issue
I've had my cv rebuilt at least 2x now, and it crapped again.
The collar pulls away from the ball housing and there is noticeable slop.
While I don't have the zerk necessary(couldn't source one), I have been greasing it manually regularly in fall/spring.
First failure they "improved" it with a Teflon or some polymer, it failed in short order, so they rebuilt it back to orig steel back in 6/2009.
I'm well within angle limits at 20.
Is there someone close to GR that rebuilds these things?
It's my DD and I do not want to chirp around on the front Aussie.
Thank you, thank you very much
|Thread Tools||Search this Thread|