Go Back   Great Lakes 4x4. The largest offroad forum in the Midwest > Great Lakes 4x4 Marketplace > Vehicle Part Outs
GL4x4 Live! GL4x4 Casino

Thread Tools
Old April 8th, 2011, 12:51 PM   #1
Join Date: 08-17-09
Location: Libertyville, IL
Posts: 7
iTrader: (0)
Parting out 77 Chevy K10

Parting out 1977 Chevy K10 with an 1984 K10 body
SM465/NP205 - $500 - Was originally a mechanical setup, I made a hydro setup for it. New clutch that is 4 years old but has less than 50miles on it. I would like to sell as a complete setup from pedals to clutch.
Engine - $500 - 350 with 4-bolt mains, Edelbrock performer intake, Q-jet rebuilt 6months ago, painted headers. Engine is still in truck, runs good.
GM 12b/D44 - $350 - 3.08 gears with Gov-bomb in the rear. Front needs balljoints. Price is high because I have $150(have receipts) in steering joints, mostly moog.
Driveshafts - $300 - 2 Brand new driveshafts, rear has 1350s, not sure on the front. Have receipts for both, these were off a 1977 reg cab short bed.

Front fenders - $125 - Inner fenders included, these are aftermarket fenders. Fenders are in fair condition, no rust except the inner fender under the master cylinder. They have been cut to fit larger tires, see pictures.
Hood - $45 - Decent condition, has holes for hood pins
Doors - $125 - Doors are good for shells. Pass side has large dent, windows works good, rest needs replacing. Drivers side needs complete overhaul, inner panels do not match. These are aftermarket doors.
Bench seat - $20 - Decent condition, vinyl.
Tailgate band - $35 - Missing Chevrolet symbol
Toolbox - $40 - Locks work
Sliding rear windows - $20 - I have 2, one is black the other is aluminum

Front springs - $25
6" Tuff Country front lift kit - $350 - 6" springs, u-bolts, raised steering arm, never used
Mufflers - $25/each - Flowmaster 2" center inlet/outlets, will include the 2" pipe going to the mufflers
35" Tires - $25/each - Reming mud tires, 25% tread. White American racing rims that are rusting. Tires and only good as spares.
Dynomax Headers - $250 - Ceramic coated headers, new in box.
TH350/NP203 - $60 - TH350 did not have reverse when pulled, np203 and range box connected
D44/12B Parts - $60 - I have a full set of axle shafts and warn hubs
Instrument bezel - $40 - My instrument bezel has been modified for aftermarket gauges, it does not include guages but all you have to do mount guages, the wiring will be there. It disconnects with a single connector.

If you are interested in any other parts I may have or something like a rolling chassis PM me.

I am located in Libertyville, about 3 miles south of Six Flags Great America. I'm not interested in shipping most of these items, small/light items I may be able to ship at your expense.

Album of pictures of the truck are available here: https://picasaweb.google.com/zak.her...eat=directlink
ZeroZ400 is offline   Reply With Quote
Old April 8th, 2011, 09:06 PM   #2
Senior Member
Join Date: 12-02-10
Location: lansing mi
Posts: 1,012
iTrader: (1)
Pics of lift send to 517 703 4936
vteckickin is offline   Reply With Quote
Old April 11th, 2011, 08:08 PM   #3
Senior Member
spectreblazer's Avatar
Join Date: 01-06-11
Location: kalamazoo
Posts: 203
iTrader: (1)
is the lift just for the front or is it complete with a 6" rear springs?

spectreblazer is offline   Reply With Quote
Old April 12th, 2011, 01:09 PM   #4
Join Date: 08-17-09
Location: Libertyville, IL
Posts: 7
iTrader: (0)
It is just a front lift kit. Nothing for the rear. I'll snap some pictures tomorrow. Going to the Rush concert at the United Center tonight
ZeroZ400 is offline   Reply With Quote
Great Lakes 4x4. The largest offroad forum in the Midwest > Great Lakes 4x4 Marketplace > Vehicle Part Outs
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:24 AM.

Powered by: vBulletin, Copyright 2000 - 2012, Jelsoft Enterprises Ltd.
Copyright 2005 - 2012 Cracker Enterprises - Powered by Linux
vB Ad Management by =RedTyger=
Page generated in 0.07203 seconds with 18 queries