|April 13th, 2010, 05:59 PM||#1|
86 cj 7
Frame and body are an 86 cj7.
78 or 79 AMC 360 out of a wagoneer. rebuilt less than 1,000 miles ago. all new bearings and rings. heads were rebuilt at Greg;s Cylinder Heads in riverview. All new valves, guides springs, valve seats. High torque cam, HEI, Truck avenger carb w/ electric fuel pump. $1000obo
T-176 with new clutch when motor installed. $200
Dana 300 w/ homemade twin stick $200
dana 44 out of a 78 wagoneer, narrowed 4" on long side, runs bonco long shaft w/ dana 30 outers w/ larger unjoints. 5.89 gears, locRight lunch box, superwinch lock outs. Installed alittle over a year ago and has 3 trips on it. has all new bearings. Has custom made drag link and tie rod. made out of 1 1/2" dom w/ hiem joints. Knuckles(dana 30 so that i could keep my bolt pattern) are drilled out to take the heim joints. $650 obo-SOLD
dana 44, the ones that were only in cj's the last half of 86. 5.89 gears, minispool. 3 trips w/ new gears and bearings. $700obo
4" lift springs, not sure of the make, bought them used. 1 1/2" lift shackles. total lift 5 1/2". $250 for springs shackles and shocks
Full cage built and installed by Northwest 4x4. Tied into the frame. $500 obo
Body is in really rough shape, I have cut all the fenders and there are rust holes in it.
Solid, no rust holes or soft spots. $600 obo
Currenty has 35" creepy crawlers, but i also have an older set of 35" MT's i can put on it(i would like to keep the creepy crawlers but for the right price id let them go.) $1000 obo
Selling to build something new.
pm me with any questions.
Last edited by dirtrider; November 8th, 2010 at 08:58 PM.
|Thread Tools||Search this Thread|