The axles are out of a 79 f-250 and have been completely rebuilt and painted with brand new bearings, rotors, dual piston calipers, brake pads, and fluids. The were stripped and sandblasted and painted with por15. The front D44HP has new ball joints, new warn premium locking hubs, a TNT truss with all of the TJ mounts, bluetorch fab highsteer arms, 4.10 gears and an lsd. The rear is a ff D60 with 4.10s, a lsd, all of the stock TJ mounts (coil cups, track bar, LCA/UCA mounts) and all new parts for the drum brakes. These axles are setup and ready to bolt directly into a TJ and I will include all of the steerings arms with one ton chevy tres, pitman arm, and the driveshafts to fit the D44 and D60 yokes along with spare D60 shafts, I will also throw in a np231 with a sye. The brake lines on both the front and rear are extra long braided steel skyjacker lines. I am asking $3000 obo the axles have around 200 miles on them. The axles are still currently under the TJ. The pictures hardly do the axles justice. If you would like to see them in person please give me a call at 586 764 7990 and we can set something up, my name is Mac.
Nearly Full Flex with 4" SA Lift 1" BL and 36" SS TSLs