|October 17th, 2011, 08:56 AM||#1|
1993 YJ Sale or trade sold/traded
Fort Wayne IN
Trades Open to anything but prefer. 4x4 quad, side x side ect.
Frame is very very solid. Almost rust free. The tub has a few rusty spots but I cleaned them up and painted them.
305 Engine (Burns oil) Runs decent needs a smaller intake and carb.
SM415 4 speed
205 Transfer case
14 bolt rear axle
44 front axle Broken passenger axle shaft.
40 inch tires 25-35% tread, the rears have been regrooved.
coils all around
5 point harness Will throw in 2 5 point seats
Rear disc brake conversion
All fluids changed, even with the correct transmission fluid
Rebuilt front axle, new seals, ball joints, u joints ect.
New u Joints on the drive shafts.
All new lug nuts
Caged tied into the frame
All bolts replaced with grade 8
New alternator (comes with spare)
Nice Big aluminum radiator
New brake lines
New fuel lines
New throttle cable and brackets
New belt tensioner.
Burns oil Smokes at idle.
Passenger axle shaft is broke
Wiring is a complete mess from the previous owner. I fixed some of it.
Carb and intake are for a built 350 and its on a 305. Its running off 2 barrel right now and works pretty good.
Power steering pumps leaks. Its leaking out of the front seal.
Thats really all I can think of at the moment.
It has a few issues but this is a awesome platform to start with. The hard work is done!
Im going to sell this AS IS with Bill of Sale. I have a title and paper work showing its not stolen but due to buying it out of state the DMV has made this a PITA. Its offroad only anyways so I just register it as a offroad vehicle.
I did wheel this thing at the dunes and had a blast. It really surprised me at how well it did.
Text- two six zero - 610-2610
Last edited by ffjosh; January 3rd, 2012 at 08:57 AM.
|December 12th, 2011, 08:32 AM||#20|
Make me trade offers. I need something road worthy on a trade.
I wouldn't mind a 4x4 truck
If its a trail rig thats on road capable I would like it to be something smaller. Like a sami or something.
|Thread Tools||Search this Thread|