|February 6th, 2009, 04:14 PM||#1|
**SOLD**sbc 383 stroker
I had a friend post this here a few weeks ago, but now i have pics and a dyno sim. its a 383 stroker, using all brand new parts, minus the rebuilt heads and carb. heres a list of the parts i used.
GM L05 block bored .030 oversized.
SCAT 3.75" stroker crank.
SCAT I-beam rods.
ARP rod bolts.
Keith Black hyperutectic pistons 9.5:1.
speed pro rings.
all clevite 77 bearings.
brass freeze plugs.
GM heads 2.02 / 1.60.
Comp cams xtreme energy .454 lift / 218* duration (@.050) / 110* seperation.
Comp cams hydraulic lifters.
Comp cams valve springs.
Comp cams retainers / keepers.
ARP 7/16 rocker studs.
crane cam energizer roller rockers (roller tip, and fulcrum.)
all fel-pro gaskets.
jegs high performance oil pump.
jegs fuel pump block off plate.
Edelbrock 4bbl, 650 cfm, manual choke carburetor.
Edelbrock dual plane performer RPM manifold.
Edelbrock elite airfilter.
GM tall profile crinkle valve covers with baffle, matching breather.
GM full length headers.
ARP header bolts.
(the dyno run is before roller rockers)
Last edited by Ridin Dirty; November 1st, 2009 at 01:33 AM.