|January 26th, 2009, 12:28 PM||#1|
1994 FOrd Bronco
I am selling my 94 bronco here is a list of some of the things that are done to it. i am sure i am leaving some things out.
1.New PCM (computer) with latest software as of 2004 - has shift improvement for transmission
2.JET chip in PCM
3.Ford Racing 24lb matched/metered fuel injectors
4.Air aid Plenum spacer between upper and lower intake plenum
5.Pro-Am MAF sensor - larger and reads far more accurate than stock
6.K&N oversized filter and adaptor
7.Intake plenum and throttle body surfaces flowed and polished
9.MSD TFI Blaster ignition coil
11.MSD Racing grade wires
12.MSD Spark advance/retard box w/ harness
13.Crane competition cam - i cant remember the numbers but it was at the higher end of Where the stock PCM would still work well with it.
14.New Ford Pistons
15.New ford Crank
16.New bearings of course (entire motor)
17.Heads flowed/polished/decked and given 3 angle valve job
19.Summit Shorty headers
20.Breslin header bolts w/ center locks
21.All brass freeze plugs
22.Melling high volume oil pump
23.Newer double roller timing set
24.Newer water pump
25.Every sending unit/sensor on motor replaced at rebuild
26.Smog pump removed - serpentine belt re-routed and shortened
27.New cooling fan
28.All new Goodyear high-miler hoses with 100,000 mile guarantee on them
29.Entire motor painted in Ford Blue with 3 coats primer and 4 coats actual paint
30.Catalytic converter removed
31.New Ford vacuum lines at rebuild
32. 4.56 front and rear. 30,000miles on rebuilt front, 500miles on rebuilt rear,
33. True Trac Limited slip in front
34. 302 and tranny rebuilt about 30,000miles
35. 37in Goodyear wrangler mtr with 70% tread
36. Complete new brakes in the rear with about 800miles.
37. Everything in the front end redone from tire to tire.
Last edited by Bronco78; May 25th, 2010 at 12:37 PM.