Great Lakes 4x4. The largest offroad forum in the Midwest banner

.....Delete

2K views 17 replies 7 participants last post by  itchy 
#1 · (Edited)
This is from a 2002 F250 SuperDuty, V-10, 3.73 ratio. Does not have calipers, but have the rotors. They are decent, but will need to be turned. (little rusty from sitting) $550

Keith 734 558 8998

Axle is from a 2002 F-250 with the Triton V-10, and the axle ratio is 3.73
Dana part number # 611159

post #17 confirms axle with part numbers.
THIS IS NOT A DANA 50!!!!!!!!
 
#7 ·
Ill check the production date on the truck tomorrow. I believe it was 10/01. So it could possibly be a 2002. Ill get a pic of the axle as well.
Are the 50's similiar in aperance? Cause this thing is gigantic. Ill run the vin with the dealer tommorrow as well, so I get the right info on here. Thanks for the input fellas.
 
#10 ·
OK....I ran the vin# thru an online decoder, and it comes back as a 2002 F250 with the V-10. But I cant seem to get the free site to tell me what axle it is.
It has an axle code C1, and that comes back as a 3.73, but still not 100% sure if this a 60. I thought the truck was a F350, but its not.

I'll change the add to reflect the new info.
 
#17 · (Edited)
Confirmation has been made on the front axle.......
IT IS A DANA 60 with 3.73 ratio.
Check below links part number on axle is 611159/248 These are the Dana part number for the 60 offered in the Super Duty in 2002. Page 25 on the link. Part number is in the upper left hand corner.
Not sure if I really want to give it up now for the lowered price...LOL. Figure all the links would give the know it all's something to read.:finger:

http://www2.dana.com/pdf/X510-2.pdf

http://www.pirate4x4.com/tech/billavista/60_front/dana60bom.html

http://www.ford-trucks.com/forums/680090-lets-talk-front-axles.html
 
You have insufficient privileges to reply here.
Top