I really like it. Do you have more pics and any other specs? What did you use for the hinge? Where did you get the latch. I am thinking about making one my self
I bought the pivot pin from etrailers.com. Its 1 inch diameter in the pivot area and steps up to about 1 1/2 inch in the area thats welded in. The pivot hub was made from a piece of 2 1/2 dia stock. I lathe drilled it to one inch bore and then I opened the end up with a for the castle nut and the dust cap. The latch is from McMaster Carr. The part number is 5135a25 1000 lb capacity. I made the mistake of ordering the wrong latch the first time. This is the one that goes around the corner. I like it recessed in the tube. Its out of the way.
I used 1/4 inch plates at the original mounting spots with 2x4 coming out to the main tube. The main tube is tied into the hitch in three places and round head 1/4 bolts on the quarters. I know people have had cracking issues when using only the original mount areas. The small fillers around the tailights and below the flares are 1/8 inch stock. Easy to shape. This winter I will finish sanding and touching up. The sq tube at the latch area needs a cap welded on.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Great Lakes 4x4. The largest offroad forum in the Midwest
4.2M posts
30.9K members
Since 2005
A forum community dedicated to Great Lakes 4X4 owners and enthusiasts. Come join the discussion about performance, trails, tires, modifications, classifieds, troubleshooting, maintenance, and more!