Entry level Designer - UG NX (may be filled)
Simulation Engineer
Sr. Design Engineer
----------------------------------------
Entry level Designer
(I think this description is the same they use for Sr level, so dont' let it scare you if you are interested and have any UG experience with solid modeling)
Job Description
Responsible for the creation of CAD models as directed by the Design Engineer
Responsible for the creation of accurate and good quality CAD models that are acceptable for manufacturing
Minimum of CAD Level 1 ability: Level 1, Basic knowledge, able to model simple 3D parts and detail drawings. Preferred is CAD Level 2 ability: Level 2, Basic plus experience, able to model complex parts.
Must understand the function of the design as explained by the Design Engineer. It is the incumbent’s responsibility to question the engineer until the function/design is understood. It is implied that by meeting the function the part is also packagable within the allotted space
Meet timing requirements as communicated by the Engineer or Supervisor. Give adequate notice if there are CAD related timing concerns
Responsible to understand and use appropriate GD&T principles and methods in the design process. Requesting training if necessary
Responsible for creation of part drawings as requested by the Design Engineer with correct GD&T methodology
Must keep oneself up to date of the latest CAD software functionality and methods
Must understand the basic impacts on the part design due to injection molding, i.e. making the part manufacturable
Knowledge and Experience
Degree and/or Certificate of completion for CAD software (specifically UG) or equivalent training and/or experience
Knowledge of drawing principles and methods
Understanding of product design principles and problem-solving techniques
Good interpersonal skills to communicate with engineers, customers, suppliers and peers
Good personal project management and decision making skills
Simulation Engineer
Responsibilities:
Support the engineering team in developing functional products by performing CAE analysis on Air Intake manifolds and other components.
Types of analysis will include Static non-linear, dynamic, acoustic, thermal, sealing and fatigue.
Perform representative and accurate simulations in a timely manner.
Make CAE analysis reports and presentations to communicate results and recommendations to the Engineering team.
Contribute to the continuous improvement of simulation procedures and use of simulation tools.
Contribute to the development of new CAE capabilities, methodologies and expertise.
Participate in correlation work between CAE analyses and actual testing in collaboration with the lab team.
Requirements:
Master degree in Mechanical Engineering.
Good Knowledge on Finite Element Analysis and Computational Fluid Dynamics.
Minimum of 3 years of relevant experience in CAE simulation using ABAQUS software for plastic applications preferably in the automotive industry for:
o Non-linear structural, dynamics (vibration), acoustic (NVH), Thermal, sealing, fatigue analyses.
Experience in CFD (steady and unsteady flow) using StarCCM+ software.
Proficiency in the following CAE software: ABAQUS, ANSA, Star CCM+
Good knowledge of material properties for polymers and testing (materials and components).
Strong organizational and interpersonal skills.
Must be able to execute multiple projects simultaneously.
Sr. Design Engineer
Responsibilities:
Design system components to meet customer specifications within established timelines by providing technical direction to designers and technicians, conducting meetings and applying good engineering principles.
Communicate to internal/external customers/suppliers, product definition and key characteristics.
Interface with customer to define design requirements and assist customer in the design of the system.
With the support of Validation Engineer:
o Identify, coordinate and communicate FMEA, validation simulation and tests to internal project team and external customer and suppliers.
o Design fixtures, establish procedures and instrumentation for specialized system and component testing to provide vital design data.
o Perform failure analysis associated with our products using team-oriented problem solving techniques.
o Generate and report product durability, reliability, and performance capabilities based on laboratory and field test results.
Support Manufacturing Engineer, Equipment Engineer, and outside suppliers in developing the best methods of producing parts meeting customer's quality and cost requirements.
Issue, maintain, and revise product specifications to keep record current with new information and requirements.
Communicate with program managers and customers in establishing design and development programs that will meet customer timing and specifications.
Assist buyer, prototype and Tool Development Manager in understanding customer specifications and in the source selection for prototype and production parts suppliers.
Essential Skills/Requirements:
A Bachelor's degree (or equivalent experience) in an engineering (mechanical preferred) or science discipline and three years related experience.
Must have a detailed understanding of products, product validation and release systems, services, test techniques and product and system FMEA's or the ability to learn these processes.
Requires a thorough understanding of mechanical engineering principles and problem-solving techniques.
Ability to design/analyze various kinds of components, and provide failure analysis.
Good interpersonal skills to communication with customers, suppliers and peers.
Ability of project management and decision making in order to accomplish jobs in an efficient manner.
Simulation Engineer
Sr. Design Engineer
----------------------------------------
Entry level Designer
(I think this description is the same they use for Sr level, so dont' let it scare you if you are interested and have any UG experience with solid modeling)
Job Description
Responsible for the creation of CAD models as directed by the Design Engineer
Responsible for the creation of accurate and good quality CAD models that are acceptable for manufacturing
Minimum of CAD Level 1 ability: Level 1, Basic knowledge, able to model simple 3D parts and detail drawings. Preferred is CAD Level 2 ability: Level 2, Basic plus experience, able to model complex parts.
Must understand the function of the design as explained by the Design Engineer. It is the incumbent’s responsibility to question the engineer until the function/design is understood. It is implied that by meeting the function the part is also packagable within the allotted space
Meet timing requirements as communicated by the Engineer or Supervisor. Give adequate notice if there are CAD related timing concerns
Responsible to understand and use appropriate GD&T principles and methods in the design process. Requesting training if necessary
Responsible for creation of part drawings as requested by the Design Engineer with correct GD&T methodology
Must keep oneself up to date of the latest CAD software functionality and methods
Must understand the basic impacts on the part design due to injection molding, i.e. making the part manufacturable
Knowledge and Experience
Degree and/or Certificate of completion for CAD software (specifically UG) or equivalent training and/or experience
Knowledge of drawing principles and methods
Understanding of product design principles and problem-solving techniques
Good interpersonal skills to communicate with engineers, customers, suppliers and peers
Good personal project management and decision making skills
Simulation Engineer
Responsibilities:
Support the engineering team in developing functional products by performing CAE analysis on Air Intake manifolds and other components.
Types of analysis will include Static non-linear, dynamic, acoustic, thermal, sealing and fatigue.
Perform representative and accurate simulations in a timely manner.
Make CAE analysis reports and presentations to communicate results and recommendations to the Engineering team.
Contribute to the continuous improvement of simulation procedures and use of simulation tools.
Contribute to the development of new CAE capabilities, methodologies and expertise.
Participate in correlation work between CAE analyses and actual testing in collaboration with the lab team.
Requirements:
Master degree in Mechanical Engineering.
Good Knowledge on Finite Element Analysis and Computational Fluid Dynamics.
Minimum of 3 years of relevant experience in CAE simulation using ABAQUS software for plastic applications preferably in the automotive industry for:
o Non-linear structural, dynamics (vibration), acoustic (NVH), Thermal, sealing, fatigue analyses.
Experience in CFD (steady and unsteady flow) using StarCCM+ software.
Proficiency in the following CAE software: ABAQUS, ANSA, Star CCM+
Good knowledge of material properties for polymers and testing (materials and components).
Strong organizational and interpersonal skills.
Must be able to execute multiple projects simultaneously.
Sr. Design Engineer
Responsibilities:
Design system components to meet customer specifications within established timelines by providing technical direction to designers and technicians, conducting meetings and applying good engineering principles.
Communicate to internal/external customers/suppliers, product definition and key characteristics.
Interface with customer to define design requirements and assist customer in the design of the system.
With the support of Validation Engineer:
o Identify, coordinate and communicate FMEA, validation simulation and tests to internal project team and external customer and suppliers.
o Design fixtures, establish procedures and instrumentation for specialized system and component testing to provide vital design data.
o Perform failure analysis associated with our products using team-oriented problem solving techniques.
o Generate and report product durability, reliability, and performance capabilities based on laboratory and field test results.
Support Manufacturing Engineer, Equipment Engineer, and outside suppliers in developing the best methods of producing parts meeting customer's quality and cost requirements.
Issue, maintain, and revise product specifications to keep record current with new information and requirements.
Communicate with program managers and customers in establishing design and development programs that will meet customer timing and specifications.
Assist buyer, prototype and Tool Development Manager in understanding customer specifications and in the source selection for prototype and production parts suppliers.
Essential Skills/Requirements:
A Bachelor's degree (or equivalent experience) in an engineering (mechanical preferred) or science discipline and three years related experience.
Must have a detailed understanding of products, product validation and release systems, services, test techniques and product and system FMEA's or the ability to learn these processes.
Requires a thorough understanding of mechanical engineering principles and problem-solving techniques.
Ability to design/analyze various kinds of components, and provide failure analysis.
Good interpersonal skills to communication with customers, suppliers and peers.
Ability of project management and decision making in order to accomplish jobs in an efficient manner.