|June 12th, 2014, 10:53 AM||#41|
Join Date: 11-06-05
Location: Dearborn Heights, MI
Mentioned: 3 Post(s)
Special Thanks and Recommendations to;
PAC Racing Springs
Joint Clutch and Gear
|June 12th, 2014, 02:51 PM||#42|
Join Date: 03-16-07
Location: Grand Rapids, MI
Mentioned: 2 Post(s)
|June 12th, 2014, 04:25 PM||#43|
bronco built for fun
Join Date: 02-01-07
Location: Hamilton, MI
Mentioned: 0 Post(s)
How about a 393?
stroker crank, 351W rods with an off the shelf 302 piston? I had one with just some E7TE heads with port cleanup, made just over 325@ the rear tires, and a boat load of torque too.
Crank was under $350, refurbished my rods and bought a set of CHP pistons.
total I was into it about $2400 carb to pan
|June 16th, 2014, 04:45 PM||#44|
Community Smart Ass.....
Join Date: 02-06-13
Mentioned: 4 Post(s)
Read this today... And thought of this thread...
|September 9th, 2014, 07:54 PM||#46|
Wishin' I waz fishin'
Join Date: 03-29-06
Location: Grand Haven, MI
Mentioned: 15 Post(s)
How much ya wanna spend?
500 HP Motor
4.100 x 4.030 418 CI
Trick flow CNC 205 heads, AFR 225's or some ported High ports
Custom Hyd. Roller cam, link bar lifters
Super victor EFI intake, accufab 4150 TB
Holley HP EFI
Cheap Thrills Off Road
2003 F-250 4X4 7.3 PSD Crew Cab
|September 16th, 2014, 04:36 AM||#47|
Join Date: 09-06-08
Mentioned: 9 Post(s)
Just build a dang 466. You can make 400hp with a 460 without much work at all. Toss some gears in the truck in the mid 3's and you will not need overdrive.
Watch Craigslist. 460's come across there all the time. Like this one for instance;
|Thread Tools||Search this Thread|