|November 4th, 2012, 04:43 PM||#1|
Join Date: 06-05-08
Location: harrison mi.
Mentioned: 0 Post(s)
460 mock up block
Looking to see if anybody has a 460 mock up block
Just got a fox body mustang and I'm putting In a 460.
Just thought a mock up block would make things a little Easyer
|November 4th, 2012, 06:06 PM||#2|
270psi triple expansion
Join Date: 09-06-08
Mentioned: 11 Post(s)
May want to put this in the wanted section.
If you have the engine you can make a mock up out of plywood copying the face and rear bottom and top then bolt the oil pan. It will be a cob job but I did one with a 350 once out of a sheet of plywood I had laying around. It weighed like 10 pounds and about 50 with the oil pan, some old stripped down Aluminum heads, and intake bolted to the plywood.
Yes I am cheap. You can also find a cast boat anchor and tear it down.
Maybe this guy still has these for like 200.
Tear it down toss the bits in your scrap pile.
|Thread Tools||Search this Thread|