20' Gooseneck trailer $1950 (traded) - Great Lakes 4x4. The largest offroad forum in the Midwest

Elvis13 · August 8th, 2012, 01:16 PM

15’+ 5’ tail, 100” wide. Brake backing plates and drums are for 10k axles (I cannot verify axle rating with any other #’s) axles are heavy duty, bearings are good and greased. 235/85 16r 10ply tires, all tires are new within the last year.

The trailer pulls beautifully, I have had 2 500 mile roundtrip vacations with it with no problems other than blowing some old tires. I bought it with the intent of turning it into what I want, but I would now like to downgrade to a pull behind. The trailer is actually fairly heavy but well built, overkill for my needs. I know what it’s worth to me and I know what I have into it ($650 into tires this year). I would like to sell outright but would trade for a nice car hauler. The deck is steel and could use some attention, but I’m currently using it as is. It also is wired on a 4 pin setup so no axle brakes.

Fold out ramps are very well built and would handle much more than just a vehicle. The neck up front is steel decked for more storage. There are also stake pockets down both sides for my tie down locations.

Delivery is possible; if it doesn’t sell I’ll put brakes on it and keep it.

If you have any questions or would like to take it for a test pull let me know.

92FleXj · August 8th, 2012, 01:23 PM

i have a steel bumper pull. brand new tires,brakes,and fresh Bering grease. it is nice and light. all steel also. i will post a pic and measurements in a few min

92FleXj · August 8th, 2012, 01:32 PM

92FleXj · August 8th, 2012, 01:35 PM

trailer is black. fenders are rust color. never painted them but they are built strong to run them over. steel poles going up will come off. they were from hauling wood. pills straight and smooth. will trade but is not otherwise for sale

16' deck
20'6" overall
76" wide deck
94" wide fenders

i also have 2k into this between purchase and updates

Elvis13 · August 9th, 2012, 11:32 AM

PM replied.

Elvis13 · August 10th, 2012, 03:57 PM

Bump

texs4x4 · August 10th, 2012, 07:31 PM

Non removable ramps added. Light damaged to pass fender, new tires, new wiring, new 7 pin, good brakes, good bearings, 2" ball

Sent from my DROID RAZR using Tapatalk 2

Elvis13 · August 11th, 2012, 02:37 PM

Quote:

Originally Posted by texs4x4

Non removable ramps added. Light damaged to pass fender, new tires, new wiring, new 7 pin, good brakes, good bearings, 2" ball

Sent from my DROID RAZR using Tapatalk 2

Still waiting on the texts, what load range tires does it have on it?

Elvis13 · August 13th, 2012, 08:15 AM

Got the texts, thanks.

Elvis13 · August 16th, 2012, 04:59 PM

Traded to texs4x4. Good trade, good guy. No bullshit

August 8th, 2012, 01:16 PM	#1
Elvis13 Senior Member Join Date: 05-15-11 Location: Addison Township, MI Posts: 1,135 iTrader: (7)	20' Gooseneck trailer $1950 (traded) 15’+ 5’ tail, 100” wide. Brake backing plates and drums are for 10k axles (I cannot verify axle rating with any other #’s) axles are heavy duty, bearings are good and greased. 235/85 16r 10ply tires, all tires are new within the last year. The trailer pulls beautifully, I have had 2 500 mile roundtrip vacations with it with no problems other than blowing some old tires. I bought it with the intent of turning it into what I want, but I would now like to downgrade to a pull behind. The trailer is actually fairly heavy but well built, overkill for my needs. I know what it’s worth to me and I know what I have into it ($650 into tires this year). I would like to sell outright but would trade for a nice car hauler. The deck is steel and could use some attention, but I’m currently using it as is. It also is wired on a 4 pin setup so no axle brakes. Fold out ramps are very well built and would handle much more than just a vehicle. The neck up front is steel decked for more storage. There are also stake pockets down both sides for my tie down locations. Delivery is possible; if it doesn’t sell I’ll put brakes on it and keep it. If you have any questions or would like to take it for a test pull let me know. Last edited by Elvis13; August 16th, 2012 at 05:00 PM.

August 10th, 2012, 07:31 PM	#7
texs4x4 Member Join Date: 06-28-12 Location: Perrysburg Ohio Posts: 91 iTrader: (5)	Non removable ramps added. Light damaged to pass fender, new tires, new wiring, new 7 pin, good brakes, good bearings, 2" ball Sent from my DROID RAZR using Tapatalk 2 Attached Thumbnails

August 8th, 2012, 01:23 PM	#2
92FleXj stacks stacked on stacks Join Date: 07-04-11 Location: Howell, MI Posts: 2,240 iTrader: (5)	i have a steel bumper pull. brand new tires,brakes,and fresh Bering grease. it is nice and light. all steel also. i will post a pic and measurements in a few min

August 8th, 2012, 01:35 PM	#4
92FleXj stacks stacked on stacks Join Date: 07-04-11 Location: Howell, MI Posts: 2,240 iTrader: (5)	trailer is black. fenders are rust color. never painted them but they are built strong to run them over. steel poles going up will come off. they were from hauling wood. pills straight and smooth. will trade but is not otherwise for sale 16' deck 20'6" overall 76" wide deck 94" wide fenders i also have 2k into this between purchase and updates

August 9th, 2012, 11:32 AM	#5
Elvis13 Senior Member Join Date: 05-15-11 Location: Addison Township, MI Posts: 1,135 iTrader: (7)	PM replied.

August 10th, 2012, 03:57 PM	#6
Elvis13 Senior Member Join Date: 05-15-11 Location: Addison Township, MI Posts: 1,135 iTrader: (7)	Bump

August 13th, 2012, 08:15 AM	#9
Elvis13 Senior Member Join Date: 05-15-11 Location: Addison Township, MI Posts: 1,135 iTrader: (7)	Got the texts, thanks.

August 16th, 2012, 04:59 PM	#10
Elvis13 Senior Member Join Date: 05-15-11 Location: Addison Township, MI Posts: 1,135 iTrader: (7)	Traded to texs4x4. Good trade, good guy. No bullshit