tube bender + hydro setup ***SOLD*** - Great Lakes 4x4. The largest offroad forum in the Midwest

ArcticCat843 · May 29th, 2012, 10:36 PM

JD2 tube bender. It is the one with the thicker arm, has the degree wheel, a 48" handle and a stand. Never used but has sat in a garage for a couple years and has light surface rust on the pins and stuff. Nothing wrong with it at all. 430 new with shorter handle

1 5/8 6.5 180 degree die. never used. 300 new

Hydro pump bought from a guy on pirate. http://www.pirate4x4.com/forum/showt...474&highlight= Paid 375 for it total and it has never left the box that it was shipped to me in. Its brand new and as you can see from the guys posts, it is a perfect pump for a bender.

Log splitter hydro valve. Also new and has sat for a while. Looks like this.
http://www.northerntool.com/shop/tools/product_472_472 so they are like 85 new plus shipping.

From my math that adds up to just under 1200 bucks. All you need is some lines and a ram. So for about 150 bucks more you could finish it and have a full hydro bender.

Im looking for 1000 OBO. Keep in mind everything is in brand new never used condition. I might split it up for the right offer but they die has to sell first. Also might trade for certain firearms. Really wanting a 3 inch 1911, maybe a revolver. Make me a offer, you never know.

ArcticCat843 · June 4th, 2012, 11:00 PM

Bump

ArcticCat843 · June 8th, 2012, 12:15 PM

Bumb price is obo.

bigbchevy · June 8th, 2012, 12:20 PM

What model?

ArcticCat843 · June 9th, 2012, 11:46 AM

It says model 3 on it. I could be wrong but i think jd2 offered a upgrade for the model 3 which was a little thicker arms and bigger pins. After looking at there site, it doesnt look like that is the case anymore but I think my bender had that upgrade. It seems like it was like a 30-50 dollar upgrade back 3-5 years ago (maybe before they came out with the model 32?)

Price is still OBO. I would prefer to sell as a package and make someone a good deal but ill split it up if i have to. I need some cash to build a deck.

buttercr125 · June 9th, 2012, 12:31 PM

The model 3 has the thinner arms and pins. The model 32 is the one with the thicker arms and pins.

ArcticCat843 · June 10th, 2012, 10:07 PM

I know that's how it is now but I'm pretty sure they didn't even make a model 32 when I bought this. I'm going to say its 5 years old. I deffinetly dont think it would have problems bending tubing. It's pretty heavy duty.

ArcticCat843 · June 12th, 2012, 09:50 AM

900 bucks for everything

whiterhino · June 12th, 2012, 12:54 PM

Pics?

ArcticCat843 · June 12th, 2012, 05:24 PM

I'll try to get some up tomorrow

BusiSussie · June 12th, 2012, 05:35 PM

you are best!

ArcticCat843 · July 19th, 2012, 07:25 PM

Bump still don't have any pics but it looks like the one on there site. I'll do my best to get some up soon. I'm pretty motivated to sell it right now. Make me a offer

ArcticCat843 · July 21st, 2012, 08:25 AM

Bump need this gone 850 obo

bigbchevy · July 21st, 2012, 09:20 AM

Pics

ArcticCat843 · July 25th, 2012, 09:32 PM

Finally I got some pics. I sprayed some wd40 on it and whipped it up with some paper towel. Like i originally said, there is some light surface rust. You can see that alot of it wiped right off with a paper towel, there is no pitting or anything that effect the function of the bender.

Like i said before, i dont think its ever been bolted to the floor. (aka never been used)

The valve is new, its just been sitting in a garage for a few years.

ArcticCat843 · July 26th, 2012, 04:58 PM

Bump

ArcticCat843 · July 28th, 2012, 08:58 AM

825.

68Scout · July 28th, 2012, 12:07 PM

I'll start the bidding at $550. Cash money.

ArcticCat843 · July 28th, 2012, 01:38 PM

550 with no pump or valve and you have a deal

Otherwise not gonna happen I've turned down two offers that were higher than that already. 825 is obo but I'm not going to just give it away

68Scout · July 31st, 2012, 09:55 PM

$625

May 29th, 2012, 10:36 PM	#1
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	tube bender + hydro setup *SOLD* JD2 tube bender. It is the one with the thicker arm, has the degree wheel, a 48" handle and a stand. Never used but has sat in a garage for a couple years and has light surface rust on the pins and stuff. Nothing wrong with it at all. 430 new with shorter handle 1 5/8 6.5 180 degree die. never used. 300 new Hydro pump bought from a guy on pirate. http://www.pirate4x4.com/forum/showt...474&highlight= Paid 375 for it total and it has never left the box that it was shipped to me in. Its brand new and as you can see from the guys posts, it is a perfect pump for a bender. Log splitter hydro valve. Also new and has sat for a while. Looks like this. http://www.northerntool.com/shop/tools/product_472_472 so they are like 85 new plus shipping. From my math that adds up to just under 1200 bucks. All you need is some lines and a ram. So for about 150 bucks more you could finish it and have a full hydro bender. Im looking for 1000 OBO. Keep in mind everything is in brand new never used condition. I might split it up for the right offer but they die has to sell first. Also might trade for certain firearms. Really wanting a 3 inch 1911, maybe a revolver. Make me a offer, you never know. Last edited by ArcticCat843; September 26th, 2012 at 07:56 AM.

June 8th, 2012, 12:20 PM	#4
bigbchevy missmrgreenagain Join Date: 09-15-07 Location: fenton /hartland mi Posts: 13,140 iTrader: (131)	What model? __________________ H.o.r.e cheap gears [url]www.ronsmachiningservice.net[url] tube bending and gear installs pm me for info! gears installed for $150 and up per axle.

June 9th, 2012, 12:31 PM	#6
buttercr125 I work out Join Date: 02-10-09 Location: Fenton, mi Posts: 2,334 iTrader: (25)	The model 3 has the thinner arms and pins. The model 32 is the one with the thicker arms and pins. __________________ If your thinking about dealing with JoshuaCripe read the link below first!! http://www.greatlakes4x4.com/showthread.php?t=219276

June 12th, 2012, 12:54 PM	#9
whiterhino I'm not old, honest... Join Date: 03-07-06 Location: Davisburg MI Posts: 16,688 iTrader: (16)	Pics? __________________ GLFWDA member since 1979. Member Southern Michigan Rock Crawlers.

June 12th, 2012, 05:35 PM	#11
BusiSussie Newbie Join Date: 03-25-12 Location: Malawi Posts: 1 iTrader: (0)	nothing else you are best!

June 4th, 2012, 11:00 PM	#2
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Bump

June 8th, 2012, 12:15 PM	#3
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Bumb price is obo.

June 9th, 2012, 11:46 AM	#5
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	It says model 3 on it. I could be wrong but i think jd2 offered a upgrade for the model 3 which was a little thicker arms and bigger pins. After looking at there site, it doesnt look like that is the case anymore but I think my bender had that upgrade. It seems like it was like a 30-50 dollar upgrade back 3-5 years ago (maybe before they came out with the model 32?) Price is still OBO. I would prefer to sell as a package and make someone a good deal but ill split it up if i have to. I need some cash to build a deck.

June 10th, 2012, 10:07 PM	#7
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	I know that's how it is now but I'm pretty sure they didn't even make a model 32 when I bought this. I'm going to say its 5 years old. I deffinetly dont think it would have problems bending tubing. It's pretty heavy duty.

June 12th, 2012, 09:50 AM	#8
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	900 bucks for everything

June 12th, 2012, 05:24 PM	#10
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	I'll try to get some up tomorrow

July 19th, 2012, 07:25 PM	#12
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Bump still don't have any pics but it looks like the one on there site. I'll do my best to get some up soon. I'm pretty motivated to sell it right now. Make me a offer

July 21st, 2012, 08:25 AM	#13
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Bump need this gone 850 obo

July 21st, 2012, 09:20 AM	#14
bigbchevy missmrgreenagain Join Date: 09-15-07 Location: fenton /hartland mi Posts: 13,140 iTrader: (131)	Pics __________________ H.o.r.e cheap gears [url]www.ronsmachiningservice.net[url] tube bending and gear installs pm me for info! gears installed for $150 and up per axle.

July 25th, 2012, 09:32 PM	#15
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Finally I got some pics. I sprayed some wd40 on it and whipped it up with some paper towel. Like i originally said, there is some light surface rust. You can see that alot of it wiped right off with a paper towel, there is no pitting or anything that effect the function of the bender. Like i said before, i dont think its ever been bolted to the floor. (aka never been used) The valve is new, its just been sitting in a garage for a few years.

July 26th, 2012, 04:58 PM	#16
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	Bump

July 28th, 2012, 08:58 AM	#17
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	825.

July 28th, 2012, 12:07 PM	#18
68Scout '68 Scout ~rebuilding Join Date: 03-22-08 Location: Grand Rapids, MI Posts: 332 iTrader: (7)	I'll start the bidding at $550. Cash money.

July 28th, 2012, 01:38 PM	#19
ArcticCat843 Senior Member Join Date: 09-30-07 Location: Battle Creek MI / Lima OH Posts: 1,701 iTrader: (25)	550 with no pump or valve and you have a deal Otherwise not gonna happen I've turned down two offers that were higher than that already. 825 is obo but I'm not going to just give it away

July 31st, 2012, 09:55 PM	#20
68Scout '68 Scout ~rebuilding Join Date: 03-22-08 Location: Grand Rapids, MI Posts: 332 iTrader: (7)	$625