|March 30th, 2012, 11:18 AM||#1|
Rebuilt 3/4 ton Chevy axles and almost new th350
Im mainly looking for trades but depending on what you have depends on the cash side of the trade!
I will most likely be coming to copemish for the comp and if I dont make it for that I will be coming down to Saginaw sometime this summer. AS LONG AS I DON'T HAVE TO MAKE A SPECIAL TRIP DELIVERY WILL BE FREE!
The parts are located by Marquette MI
Last edited by Chevyota; April 22nd, 2012 at 07:20 PM.
|May 13th, 2012, 10:24 AM||#5|
OK for those that pm me saying Im asking to much and telling me you'll give me $600 if I deliver them well here is what it cost me.
$500 for the axles. The spare shafts for the dana 60 were tossed in when I bought the axles,
$120 for the tie rod ends,
D44 U-joints $65,
$135 per gear set,
$150 for the DOM,
$100 for the D60 rockcrusher diff cover,
$50 for the D60 spare shafts,
$20 for the pinion bearing,
$3.75 pinion nut,
$20 in d60 shaft bolts,
$100 High steer arms ,
$53 U-bolts both axles ,
$75 each set leaf springs front and rear 53in and 62in,
$75 D60 disc conversion ,
$25 New pads both axles .
$125 weld in bungs,
$15.00 left and right nuts ,
$20 D44 axle seals .
Total + or - a couple dollars
Im asking a $1000 or will trade !
Last edited by Chevyota; May 13th, 2012 at 10:17 PM.
|Thread Tools||Search this Thread|