|April 8th, 2011, 12:51 PM||#1|
Join Date: 08-17-09
Location: Libertyville, IL
Mentioned: 0 Post(s)
Parting out 77 Chevy K10
Parting out 1977 Chevy K10 with an 1984 K10 body
SM465/NP205 - $500 - Was originally a mechanical setup, I made a hydro setup for it. New clutch that is 4 years old but has less than 50miles on it. I would like to sell as a complete setup from pedals to clutch.
Engine - $500 - 350 with 4-bolt mains, Edelbrock performer intake, Q-jet rebuilt 6months ago, painted headers. Engine is still in truck, runs good.
GM 12b/D44 - $350 - 3.08 gears with Gov-bomb in the rear. Front needs balljoints. Price is high because I have $150(have receipts) in steering joints, mostly moog.
Driveshafts - $300 - 2 Brand new driveshafts, rear has 1350s, not sure on the front. Have receipts for both, these were off a 1977 reg cab short bed.
Front fenders - $125 - Inner fenders included, these are aftermarket fenders. Fenders are in fair condition, no rust except the inner fender under the master cylinder. They have been cut to fit larger tires, see pictures.
Hood - $45 - Decent condition, has holes for hood pins
Doors - $125 - Doors are good for shells. Pass side has large dent, windows works good, rest needs replacing. Drivers side needs complete overhaul, inner panels do not match. These are aftermarket doors.
Bench seat - $20 - Decent condition, vinyl.
Tailgate band - $35 - Missing Chevrolet symbol
Toolbox - $40 - Locks work
Sliding rear windows - $20 - I have 2, one is black the other is aluminum
Front springs - $25
6" Tuff Country front lift kit - $350 - 6" springs, u-bolts, raised steering arm, never used
Mufflers - $25/each - Flowmaster 2" center inlet/outlets, will include the 2" pipe going to the mufflers
35" Tires - $25/each - Reming mud tires, 25% tread. White American racing rims that are rusting. Tires and only good as spares.
Dynomax Headers - $250 - Ceramic coated headers, new in box.
TH350/NP203 - $60 - TH350 did not have reverse when pulled, np203 and range box connected
D44/12B Parts - $60 - I have a full set of axle shafts and warn hubs
Instrument bezel - $40 - My instrument bezel has been modified for aftermarket gauges, it does not include guages but all you have to do mount guages, the wiring will be there. It disconnects with a single connector.
If you are interested in any other parts I may have or something like a rolling chassis PM me.
I am located in Libertyville, about 3 miles south of Six Flags Great America. I'm not interested in shipping most of these items, small/light items I may be able to ship at your expense.
Album of pictures of the truck are available here: https://picasaweb.google.com/zak.her...eat=directlink
|Thread Tools||Search this Thread|