|March 10th, 2011, 10:46 AM||#1|
Join Date: 09-06-06
Location: Middleville, MI
Mentioned: 8 Post(s)
205 front output seal help
I had a 1310 cv yoke on the front output I went to replace it with a 1310 non-cv I purchased from JBG. However the yoke seal area is a different circumference.
I am having a bit of a hard time locating the right seal within a timely manner. JBG sells the "conversion seal" but it takes me 3-4 days to receive parts and would like to get this wrapped up this weekend.
What I have is this yoke
They say I need this seal
Not sure if there part number would cross or not I interchanged it and came up with three possible seal options based on the number
22493 came back with ID 2.25 od3.355
21211 ID 2.125 od 3.066
21203 with same ID OD as 21211
The other seal was a 21061 with ID of 2.125 and OD 2.754
Above were napa numbers.
The new yoke seems to measure about 2.125 or close. Anybody got a 205 they can measure the front output od (bore) surface? Any help with part numbers or a measurement would be awesome.
|Thread Tools||Search this Thread|