|April 15th, 2008, 09:12 PM||#1|
In the band!
Join Date: 03-30-06
Location: waterford michigan
Mentioned: 0 Post(s)
I just installed a Ford AOD and ive done this one other time and i always notice fluid leaks from inside the bell , down, and onto the floor. I filled the conerter 1/2 way with it standing up while on the floor. Is this converter leaking? Will it eventually stop after the overfilling is out?
|April 15th, 2008, 10:12 PM||#3|
Join Date: 11-06-05
Location: Dearborn Heights, MI
Mentioned: 15 Post(s)
sounds like the pump seal. Ideally the snout of the torque converter will sit inside the oil pump, with a series of O-rings preventing leakage.
Special Thanks and Recommendations to;
PAC Racing Springs
Joint Clutch and Gear
|April 16th, 2008, 06:18 AM||#5|
Keep on truckin
Join Date: 11-14-07
Location: Waterford, MI
Mentioned: 2 Post(s)
other possibility other then the front seal is the gasket behind the front pump itself. just ran into this problem in a C6 in a lincoln. change both and be done with it.
|Thread Tools||Search this Thread|