I've got a Chevy K10 (long bed) that was in a bit of an accident a couple of weeks ago, now we're parting her out... Everything is good other than the front clip, radiator, and passenger bed side (floor and drivers side are alright, so you could fix it if you wanted a new bed for cheap). It was a frame-off restoration project, so everything is in really good shape. The frame and axles were sandblasted and painted, and all of the suspension is new. Ask if there is anything in specific you are looking for that you don't see here.
AVAILABLE:
-355 SBC, rebuilt w/ flat top pistons, Crane fireball cam, Flowtech headers, and performer intake - $700
-Th350 transmission, rebuilt $250
-Rebuilt NP203 $200
-D44 front axle, passenger side drop, rebuilt with new brakes, unknown gear ratio $200
-12 bolt rear axle, rebuilt with new brakes, unknown gear ratio $200
-Holly Flowtech headers for 350 (long tube) $75
-New leafs $100/pair
-New shocks $100 for all 4
-Rear drive shaft, no rust $75
-Cab is in good shape rust wise. Has a small puncture hole in the back from the wreck but its easily fixable. All glass is good except for the windshield $200
-Hood for a '73-81 (has a small dent in front) $25
-Heater cowl for '82-87, primer grey $10
-Side mirrors (in great shape, glass is good) $50
-Front bumper $75
-Center console from a Blazer $25
-Emblems galore (cheyenne, silverado, scottsdale, etc) $10
-Interior trim pieces (brushed aluminum and black) $10 a piece
-Hood hinges $20
-Brand new inner fender $50
-Gas tank with sending unit, filler spout, lines, and straps $40
-Nice set of tail lights with chrome trim $20
-Grey bucket seats $25
-Headlight bezels in good shape(the 'g' shaped ones, not the square ones) $40
-Like new body mounts $50
-Another set of body mounts $40
-Frame hangers[/b]
-Frame that's been sandblasted and repainted. Almost zero rust. The crossmember in the very back is a little bent, but it doesn't affect anything. $150
-Chrome piece that runs across the top of the grill, great shape $15
-Lower grill valance. Slightly bent on one side, but fixable $10
-Grey visors $10
-Bed, pushed in on one side $50
-Rubber door seals in great shape $10
-Steering column, non-tilt $50
--I also have a set of 15x7 black Cragar Soft 8s, 5x4.5" bolt pattern for Jeep / Ford. I only ran them for a few months so they are like new $125
SOLD:
-Doors w/ panels and glass
-Seatbelts
-Dash
-Tan bucket seats, grey set is still available
-Carpet and kick panels
-Gauge cluster plastic and bezel
Interested in trading for:
Jeep XJ / MJ items like lift components, axles, Aw4 (4wd) axle, np231 or np242, 35" or larger tires in good shape, roll bar for a mini truck, etc.
Everything is virtually rust-free other than the body, which is mostly surface rust. I have lots of parts for sale, these are just what I can think of right now. Ask if you need something other than what is listed.
I'd like to move this stuff soon, so feel free to make offers on anything. I am willing to meet you for some of the larger stuff, and can ship the smaller stuff if the buyer pays for shipping.
Feel free to make offers on anything via PM, or call/text me at (231) 920-4058. I just wanna get rid of this stuff.
AVAILABLE:
-355 SBC, rebuilt w/ flat top pistons, Crane fireball cam, Flowtech headers, and performer intake - $700
-Th350 transmission, rebuilt $250
-Rebuilt NP203 $200
-D44 front axle, passenger side drop, rebuilt with new brakes, unknown gear ratio $200
-12 bolt rear axle, rebuilt with new brakes, unknown gear ratio $200
-Holly Flowtech headers for 350 (long tube) $75
-New leafs $100/pair
-New shocks $100 for all 4
-Rear drive shaft, no rust $75
-Cab is in good shape rust wise. Has a small puncture hole in the back from the wreck but its easily fixable. All glass is good except for the windshield $200
-Hood for a '73-81 (has a small dent in front) $25
-Heater cowl for '82-87, primer grey $10
-Side mirrors (in great shape, glass is good) $50
-Front bumper $75
-Center console from a Blazer $25
-Emblems galore (cheyenne, silverado, scottsdale, etc) $10
-Interior trim pieces (brushed aluminum and black) $10 a piece
-Hood hinges $20
-Brand new inner fender $50
-Gas tank with sending unit, filler spout, lines, and straps $40
-Nice set of tail lights with chrome trim $20
-Grey bucket seats $25
-Headlight bezels in good shape(the 'g' shaped ones, not the square ones) $40
-Like new body mounts $50
-Another set of body mounts $40
-Frame hangers[/b]
-Frame that's been sandblasted and repainted. Almost zero rust. The crossmember in the very back is a little bent, but it doesn't affect anything. $150
-Chrome piece that runs across the top of the grill, great shape $15
-Lower grill valance. Slightly bent on one side, but fixable $10
-Grey visors $10
-Bed, pushed in on one side $50
-Rubber door seals in great shape $10
-Steering column, non-tilt $50
--I also have a set of 15x7 black Cragar Soft 8s, 5x4.5" bolt pattern for Jeep / Ford. I only ran them for a few months so they are like new $125
SOLD:
-Doors w/ panels and glass
-Seatbelts
-Dash
-Tan bucket seats, grey set is still available
-Carpet and kick panels
-Gauge cluster plastic and bezel
Interested in trading for:
Jeep XJ / MJ items like lift components, axles, Aw4 (4wd) axle, np231 or np242, 35" or larger tires in good shape, roll bar for a mini truck, etc.
Everything is virtually rust-free other than the body, which is mostly surface rust. I have lots of parts for sale, these are just what I can think of right now. Ask if you need something other than what is listed.
I'd like to move this stuff soon, so feel free to make offers on anything. I am willing to meet you for some of the larger stuff, and can ship the smaller stuff if the buyer pays for shipping.
Feel free to make offers on anything via PM, or call/text me at (231) 920-4058. I just wanna get rid of this stuff.