Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - yj body lift
Thread: yj body lift
View Single Post
Old March 8th, 2006, 02:05 PM   #2
sodapop
Support the Sport!
 
sodapop's Avatar
 
Join Date: 11-11-05
Location: Harrison Twp, MI
Posts: 2,015
iTrader: (18)
Mentioned: 0 Post(s)
Default

The first piece of information is to not do it. I don't have a problem with hockey pucks for lifts as long as you don't stack them. Once you start stcking them bad things can happen to your body mounts. If you want to do a 1" hockey puck lift you'll need 11 hockey pucks, making sure they are good quality and not made in china. Next you'll need to different sizes of bolts (can't recall what sizes though). Remove all the bolts from one side of you jeep and buy two identical sets except 1" longer.

To do the lift you'll need to lossen the body mounts on one side and remove the other side. Use a longish block of wood and jack the body off the frame and install the first set of pucks but leave the bolts a little loose. Then jack up the opposite side the same way as before and do that side. Expect some broken bolts or worse welded nut plates when you do it if it's from michigan.

AGAIN I WOULDN"T RECOMMEND YOU DO A @" PUCK LIFT!
sodapop is offline   Reply With Quote
 
Page generated in 0.05512 seconds with 20 queries