Originally Posted by Haggar
Not quite.. the mounting bosses showed up on the 1983 heads, but 3 holes weren't always tapped until late 83/early 84.
My 83 had the flat mounting bosses, but not all of the holes drilled. You can just drill and tap, if necessary. But sounds like they are all there.
Ok.......well mine must have been an early 83 cause everything was off. I simply used the head from a Celica and all was good
09 Dodge 2500 w/ a Cummins, dd/towrig
85 Toyota Pickup, 1tons, coilovers, 40's, ect