Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Lets set the record straight...
View Single Post
Old July 24th, 2007, 09:46 AM   #19
CheapThrillB2
FAWK YEAH!!
 
CheapThrillB2's Avatar
 
Join Date: 09-06-06
Location: Middleville, MI
Posts: 30,996
iTrader: (61)
Mentioned: 3 Post(s)
Default

okay heres a pic of a f150 D44



the radius arms bolt on with 4 bolts on each arm, the arms pinch the axle where their are wedges welded on, the 78-79 wedges are cast onto the arm and really can't be removed, for what you wanna do with the arms this will allow you to weld the wedges further in on the axle relocating the where the radius arms are (moving them in to clear the tires)

the coils attach to the top of the radius arms (the two bolts holding the little bucket in place)

buy these and this allows you to put the radius whereever you want on the axle



take the F250 housing and put the f150 knuckles, rotors,hubs,everything attaching and bolt onto the f250 through the ball joints

http://www.greatlakes4x4.com/showthread.php?t=53165

Last edited by CheapThrillB2; July 24th, 2007 at 09:50 AM.
CheapThrillB2 is offline   Reply With Quote
 
Page generated in 0.04194 seconds with 20 queries