Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - 302 stroker
Thread: 302 stroker
View Single Post
Old July 6th, 2007, 10:36 PM   #5
Senior Member
boggin-machine's Avatar
Join Date: 01-11-06
Location: Traverse city
Posts: 11,841
iTrader: (32)
Mentioned: 2 Post(s)

Originally Posted by BLUE302 View Post
My next motor will be a 347, They give you quite a bit more torque than a 302. You can build one to run on pump gas just make sure you keep the compression fairly low, under 10:1. My only suggestion is if you plan on building a stroker use a older block, do not use a H.O. block they are not as strong. A friend of mine had a 347 in a drag car, it was about 550 hp and it split the block from front to rear, and when the block split it broke the crank in half. The only thing that held the block together when we pulled the motor was the intake, the oil pan, and the ratchet strap I put around it. Don't let this scare you away from building one, that motor was a little extreme.
thanks for the input...
boggin-machine is offline   Reply With Quote
Page generated in 0.18056 seconds with 22 queries