Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - 302 stroker
Thread: 302 stroker
View Single Post
Old July 6th, 2007, 10:23 PM   #3
Tacker
Senior Member
 
Tacker's Avatar
 
Join Date: 06-15-06
Location: Fruitport / Muskegon
Posts: 10,231
iTrader: (23)
Mentioned: 5 Post(s)
Default

My next motor will be a 347, They give you quite a bit more torque than a 302. You can build one to run on pump gas just make sure you keep the compression fairly low, under 10:1. My only suggestion is if you plan on building a stroker use a older block, do not use a H.O. block they are not as strong. A friend of mine had a 347 in a drag car, it was about 550 hp and it split the block from front to rear, and when the block split it broke the crank in half. The only thing that held the block together when we pulled the motor was the intake, the oil pan, and the ratchet strap I put around it. Don't let this scare you away from building one, that motor was a little extreme.
__________________
Cheap Thrills Offroad Club

Quote:
Originally Posted by alboy79 View Post
My peronal hero... the man i aspire to be... the one, the only.... Terry... aka Tacker
Tacker is offline   Reply With Quote
 
Page generated in 0.05222 seconds with 20 queries