Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Finally another project to let sit in the garage!!
View Single Post
Old March 6th, 2007, 10:12 AM   #12
swampjeep
Swamp Stomper
 
swampjeep's Avatar
 
Join Date: 11-05-05
Location: Waterford, mi
Posts: 7,902
iTrader: (26)
Mentioned: 4 Post(s)
Default

Quote:
Originally Posted by hman1991 View Post
i used shopping cart wheels on the front of mine and casters on the rear. you can go with calmini for like 700 for a 3 inch lift or a 2.5 inch using tj coil spacers, crown vic rear shocks and strut flip. for $75 for spacers. 26 for shocks and 25 for camber bolts for front. so you will have about 126 wraped up in the 2.5 lift. even though calmini is a nice product but i cannot bring my self to putting a 700 lift on a 200 tracker. also for something in between check out boondox. i have seen all in action and all r nice. bondox had alot of flex i thought. but do not have new control arms.
I know everyone says to use the crown vic shocks, but I had a set of stock TJ fronts that had almost no miles on them, they worked great on the rear.
I imagine the cronw vic may give more travel, but the TJ's didn't seem to limit the travel very much at all,a nd definatley longer then the stock tracker ones.

and they where free

I have a few set laying around still...
swampjeep is offline   Reply With Quote
 
Page generated in 0.05878 seconds with 20 queries