Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Complete T-176 trans/bellhousing/etc.
View Single Post
Old January 23rd, 2006, 12:56 PM   #1
1x1_Speed_Craig's Avatar
Join Date: 11-09-05
Location: Grand Rapids, MI
Posts: 7,934
iTrader: (127)
Mentioned: 6 Post(s)
Default Complete T-176 trans/bellhousing/etc.

I have a complete T-176 setup (still attached to a 258 motor & Dana 300) from an '82 Scrambler with 128K miles. This would include everything needed for the T-176 swap, including the bellhousing, clutch/pressure plate, etc. I planned on running this in my Scrambler project, but found a T-18 that I'm going to run instead.

If you buy the complete trans setup, you can have the complete 258 motor (minus PS pump/bracket), as well.

Get rid of that lousy SR-4 or T-4 setup that you currently have. :)

$300 firm for the complete T-176 setup (including the 258 if you want it). I will offer this here for one (1) week prior to listing it on eBay.

1x1_Speed_Craig is online now  
Page generated in 0.06936 seconds with 21 queries