Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Mr. Beefy's "not quite yet U4 buggy" build
View Single Post
Old June 7th, 2013, 07:39 AM   #964
CheapThrillB2's Avatar
Join Date: 09-06-06
Location: Middleville, MI
Posts: 35,349
iTrader: (67)
Mentioned: 65 Post(s)

The master has a Brake Master Cylinder Fluid Control Valve on it. Attaches between the line and the master only for the rear brakes.

The bronco had the stock master from a 96 f250 1.250 bore, 03 ranger booster, and the stock pedal assembly from the 96 f250. And the same calipers in the rear as the buggy. Front calipers were 95 f350. Buggy fronts are 89 f350.

Last edited by CheapThrillB2; June 7th, 2013 at 08:06 AM.
CheapThrillB2 is offline   Reply With Quote
Page generated in 0.14069 seconds with 22 queries