I'll get some tread depth measurements after work today...can't find my stupid calipers (probably loaned them out) so I'll grab some from work.
H1 wheel centers were cut out on a lathe, the new centers are from C&M machine and were trued up at maximum backspacing (3-1/2 I think) on a lathe and professionally welded, then scuffed up and rattle-bomb primed and painted hammered black, the rock rings are from Copperhead fab and were also trued up on the lathe and professionally welded before a being rattle-canned hammered grey. For full asking price I will include a can of each for touch up... :)
(43) Jeeps and counting....a couple of them run, kinda.
Last edited by 4Bangler; April 18th, 2013 at 12:00 PM.