Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Clutch Issues on 96 F350
View Single Post
Old April 15th, 2013, 05:51 AM   #10
firehawk
Live Action!
 
firehawk's Avatar
 
Join Date: 10-02-07
Location: Clawson, Michigan
Posts: 12,528
iTrader: (44)
Mentioned: 10 Post(s)
Default

Quote:
Originally Posted by cannaert View Post
No Visible leaks.

I might have try undoing the quick connect on the Slave tomorrow and see if there is some pedal.
I would do that, mine came apart there as the roll pin worked its way out and have someone at the top to make sure you don't run the reservoir dry.

Let some fluid run out making sure not to let the reservoir run dry and then reconnect it. Then remove the slave from the bellhousing and make sure not to over extend the plunger, then while holding the slave push the plunger against the frame of the truck or something solid nearby, pump it a million times while someone is making sure to top off the reservoir. Then keep pumping it another million times. This is not very enjoyable but it works. I think if you could apply a light vacuum at the reservoir it would slowly work the bubbles out of the system.

Enjoy!
firehawk is offline   Reply With Quote
 
Page generated in 0.06838 seconds with 20 queries