Originally Posted by cannaert
I can not get the pedal to do anything. I have ZERO pressure build up on the pedal so just pumping the shit out of does Jack to it.
I have bleed it using the Gravity method, I have done the pump up with the pedal, I have even used a MityVac. and Nothing.
Every part has been swapped out except for the Master Cylinder and right now it as to be the only thing that is bad. I know the Clutch was dont wrong and was bad when I pulled it out. I am just getting pissed off. Only thing I am glad about is working for a Parts store.
I have tried everything I can think of on this damn thing and I am about to pull my hair out on it.
Can you block off the m/c? I forget what kind of line connection those used but if you can block off the mc and the pedal is the same the problem is the mc...either air or is bad. If the pedal gets high and hard your problem is downstream somewhere. At least you can narrow down what you need to concentrate on.