Rubicon tcase into an 04 LJ
I have an 04 LJ and am planning a rubicon tcase swap. I have been searching around for a write up, no luck finding one that is LJ specific. Wondering if anyone has done it or knows the answers.
I already have a body lift with a flat skid. Currently the skid is dropped 1'' and I took out my budget boost to make up the difference in angle for the stock DS so I could still run it prior to the tcase swap. I know I will need to get a longer rear drive shaft since the rubi tcase has the SYE but I'm wondering about the front DS and any other possible issues? I intend to take out the 1'' drop on skid and be completely flat once new tcase goes in.
From my understanding everything should be a direct bolt in with exception to the drive shafts? I've never had to modify a DS or buy a new one due to another mod changing the distance from tcase to pinion yolk, recommendations on where to go for ds modification or purchase of new and any advice would be appreciated.