Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Feeler 1990 xj with a sbc
View Single Post
Old February 28th, 2013, 10:33 AM   #1
cherokee's Avatar
Join Date: 05-10-10
Location: sturgis,mi
Posts: 75
iTrader: (2)
Mentioned: 0 Post(s)
Default Feeler 1990 xj with a sbc

I have a 1990 jeep cherokee back halfed 4 link rear. It will need a fuel cell and air and shock oil. The rear is a 4 link with poly bushings for the bottom bars and 2 x .250 wall dom the top bars are 1.5 x .250 dom with 3/4 x 3/4 heims the roof and sides need to be finished. It has a hp dana 44 with a dana 60 rear 4.10 gear ratio. has 18 inch fox 2.0 air shocks brand new. the front is 4 linked it needs to be redone previous owner used farm implament crap. but it has 8.0 rusty springs. wheels are wagon wheels i also have custom made rock rings not welded on yet. tires are 37x12.5x16.5 good year wrangler mt oz tires with lots of tread left. the engine is a sbc bored 30 over with a reground crank reconditioned rods new cam lifter timing chain. th350 tranny with shift kit rebuilt 5,000 miles ago with adapter going to a jeep 231 transfer case.
It does need finished the fronts done just the rear needs buttoned up and it will need a drive shaft its been stretched 11 inches. and questions call or txt 269 267 6379
thanks jason

3500 obo or trade for enclosed trailer

Last edited by cherokee; March 2nd, 2013 at 12:59 PM.
cherokee is offline   Reply With Quote
Page generated in 0.13089 seconds with 22 queries