to keep it on the cheap 44 be your best bet the main thing to look for is flat top knuckles on the axle. pretty common for the 78-79s so you can get it machined for a steering arm. if your only wanting to run the smaller tires find you a set of stock jeep wagoneer springs for the front. the other thing need to look at your tcase depending what year it is if the front output is a slip yoke or if its a fixed. if its a slip just need to find a np231c from a early 90 s10 or blazer and swap the guts and jb conversion makes a awsome sye for the rear output. do you plan on moving your front axle forward at all?
Last edited by stuftmunky2k; February 10th, 2013 at 12:56 PM.