View Single Post
Old January 3rd, 2013, 11:28 PM   #269
Low Range Drifter
JohnnyJ's Avatar
Join Date: 11-09-05
Location: Hartland, MI
Posts: 6,093
iTrader: (37)
Mentioned: 4 Post(s)

Here's the stock air box from the van this motor came from. There was a bellow hanging off the elbow that we removed and will cap. Inner fender will be have some baffling to keep mud from directly hitting the air inlets but allow for outside air to be pulled in.

Fuel cell mount. Nothing fancy. There's a bracket on the other side that captures the center 3 bolts and is welded to the b-pillar cross bar. You can pull the 4 bolts on the flanges and slide the cell out.

Neither Skinny Nor Pretty DEAK Racing 4517 Ultra 4 Mod Class Rig
Surviving Project Car Hell - We have all been there
JohnnyJ is online now   Reply With Quote
Page generated in 0.04171 seconds with 11 queries