Thread: 5.4 guru
View Single Post
Old November 29th, 2012, 05:02 PM   #6
bdd1469
bdd
 
bdd1469's Avatar
 
Join Date: 04-12-10
Location: alto mi
Posts: 2,063
iTrader: (1)
Send a message via Yahoo to bdd1469
Quote:
Originally Posted by hunter2005 View Post
thanks guys. i'll be checking it all this weekend. yea heard the coil packs are a pain in the ass to do.
Not too bad if you have small hands.I havnt done them on a van,may be easier because the dog house comes off.Probobly will not be easier because that would be too easy.I think all you need is a 1/4 " ratcet with some extensions,a 1/4 " swival and 8mm,10mm sockets. You have to unplug the injectors to get some coils out.I would put some fresh spark plugs in there while your at it,anti seize them and make sure they are tight.These motors are known for blowing spark plugs out and taking the threads with them.
Put some dieleletric grease on the coils when you install them to keep moisture out.
Might want to look at your exaust manifold bolts also as they are probobly rusted to the point of breaking soon.
bdd1469 is offline   Reply With Quote
 
Page generated in 0.03888 seconds with 11 queries