I have a similar issue.. I had some help from a shop, and they told me the actuator I had was still good, so I did not replace that. (did not have 4wd at all) we replaced the transfercase switch and now I have 4 low but no 4 high, and the lights flash and sometimes work. I would like to keep the stock 4wd system, but if i need to I will just do the posi lock conversion. I am confused, any help would be greatly appreciated.
by the way mine is a 1995.. automatic
2012 Jeep Liberty (daily driver)
Searching for the next project/toy...
*Bare Bones Off Road*
Last edited by Jeep_Shaun; January 14th, 2012 at 12:03 PM.