Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - TJ bumper
Thread: TJ bumper
View Single Post
Old December 14th, 2011, 09:35 PM   #1
Senior Member
Join Date: 04-19-07
Location: Hope/Sanford/Midland, MI
Posts: 861
iTrader: (16)
Mentioned: 0 Post(s)
Send a message via AIM to jeepxj2007
Default TJ bumper

I built this for a buddy. Let me know what you think...he had a universal winch plate that didn't have any holes that lined up to a tj so I welded them all shut and then drilled them out to bolt up...then trimmed it up a little...then the main tube is 2x4x3/16" tube with drings welded to one side...we used 1.75x.120 wall tube for the hoop and grill may look like it is crooked depending on the angle of the picture...but I assure you its did it turn out? D-rings, the winchplate, and the tube still needs to be completely welded to the bumper...underneath it also catches each frame rail bolt hole on the bottom as well. When its all done im going to grind the welds smooth on the main tube.

jeepxj2007 is offline   Reply With Quote
Page generated in 0.16079 seconds with 22 queries