Here's the upper portion of the HD Offroad Engineering kit in place. It's a tight fit. NOTE:
Any high-dollar paint you use on this upper insert portion will be scraped up/off when pressing it in place. Tolerances are tight...nice fit.
Here's the actual multi-position shackle mount bolted in place.
Mira reinstalling the original upper shackle bolt, which now holds the shackle relocation kit in place.
The install is still in-progress, as Mira had to get ready for bed (school night). Also, the stock shackle is a tight fit in the multi-position mount. I'll work on getting it finished up later this week.