Here is my modified rear tire carrier, I have changed the bolt pattern and moved the mount in to compensate for the new back spacing. Better departure angle and less leverage on the carrier it’s self. The mounting plate has moved down for a better view too.
I had to relocate the plate to the middle to see it. It is two pieces of tube sleeved over top of each other with a bolt holding it together, to allow tire removal. The plate backing is made from 3/16 so if I need it I have a piece of 1' by 6" plate for a trail repair.
Any one know of a light that I could use for the rear plate? Autozone has one but the cord exits from the top, im looking for one to go trough the back.